Wire for connecting the sensor to the tachograph.Characteristics:The length is 6 meters.Sensor connector with round contacts.Meets all EUTR requirements.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, ..
Price:
2,275 грн (з ПДВ)
DSRC module cable to tachograph, 5 mInstalling the VU and cable:- Remove the existing VU 1B tachograph.- Route the DSRC cable from the DSRC module to the VU.- Connect the 6-pin connector (1) to the DSRC module.- Connect the DSRC cable connector A (2) to the rear of the new VU.- Connect the vehicle-s..
Price:
4,186 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 15 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, re..
Price:
3,003 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 14 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, re..
Price:
2,912 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 13 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, re..
Price:
2,776 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 11 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, re..
Price:
2,594 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 10 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, re..
Price:
2,457 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 9 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, res..
Price:
2,366 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 8.5 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, r..
Price:
2,321 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 8 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, res..
Price:
2,275 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 7.5 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, r..
Price:
2,184 грн (з ПДВ)
Wire for connecting the sensor to the tachograph.The length is 7 meters.Sensor connector with flat contacts.It meets all the requirements of the EUSR.The wire has four insulated cores with a cross section of 0.75 cm2.The cores are placed in a strong metal sleeve, covered with polymer insulation, res..
Price:
2,139 грн (з ПДВ)